Feature Detection (Using Filter HOLES)
Posted: Sun Apr 23, 2023 5:16 am
RhinoCAM2023
Due to some of our parts being fairly complex (lots 3d forms) we want to utilize the Filtering for feature detection to save tie, this is vitaly important for us.
If I want to select holes only it reports no features. If I add planar faces or silhouettes it will detect some holes but not all
....These are blind holes and two thru holes in a prismatic block and we have simplified the part from a more complex fully featured mould. I can provide the .3dm file privately to support.Hopefully this can be fixed up ASAP
Thanks in advance.
UM
Due to some of our parts being fairly complex (lots 3d forms) we want to utilize the Filtering for feature detection to save tie, this is vitaly important for us.
If I want to select holes only it reports no features. If I add planar faces or silhouettes it will detect some holes but not all
....These are blind holes and two thru holes in a prismatic block and we have simplified the part from a more complex fully featured mould. I can provide the .3dm file privately to support.Hopefully this can be fixed up ASAPThanks in advance.
UM