mill both halves of counterbore hole before moving
Posted: Thu Jan 21, 2021 7:00 pm
I have a 18mm flat part with four counterbore holes. AFD detected a Hole Feature, with four instances. I defined a KB to correctly machine the holes. The problem is that the toolpath first does one half of each of the four holes, then it comes back to finish the remaining half of each hole. Is there any way to ensure that an entire hole feature is completely milled before moving to the next hole feature? The tool is the same for both top and bottom of the counterbore, and both halves use the Hole Pocketing strategy.