Visual Cam 2020_Clear Flats Problem?
Posted: Fri Sep 11, 2020 7:14 am
3D operations horizontal roughing
If I do not clear flats roughing operation will leave too much stock in certain areas, Enabling the clear flats option will take care of that but program will cut to flat surface ignoring any stock (on the flat area) I might have wished to leave in the stock option box. I would think that the stock would be left on this flat area for a finishing operation.
is this a bug or intentional? My work around is to add + offset in my z axis but this can be a time waster if the operator forgets to remove the z offset.
If I do not clear flats roughing operation will leave too much stock in certain areas, Enabling the clear flats option will take care of that but program will cut to flat surface ignoring any stock (on the flat area) I might have wished to leave in the stock option box. I would think that the stock would be left on this flat area for a finishing operation.
is this a bug or intentional? My work around is to add + offset in my z axis but this can be a time waster if the operator forgets to remove the z offset.