Unable to view model and toolpaths
-
- Posts: 24
- Joined: Tue Jul 26, 2011 2:21 pm
Unable to view model and toolpaths
I have Visualmill 2015. For some reason if I open up the program everything appears as it should. I load a previous file and all is there apart from the model and toolpaths. I have tried other files with the same result. I have tried drawing some lines and circles to see if they appear which they don't. Never had this issue before. I would appreciate some help. There is no UCS symbol in that window either.
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: Unable to view model and toolpaths
Check if the Simulate tab active in your VisualCAM Machining Operations Browser. If you do switch back to Program tab and check if your part geometry is visible. By default part visibility is toggled off when simulate tab is active. To toggle toolpath visibility on, select toolpath visibility located at the base of the machining operations browser.
-
- Posts: 24
- Joined: Tue Jul 26, 2011 2:21 pm
Re: Unable to view model and toolpaths
Problem is solved by shutting down and rebouting PC and reopening Visualmill. Don't know why this fixes it