Post processer for Pathpilot
Posted: Tue Jul 14, 2015 10:28 am
I have just bought a new Tormach Mill with pathpilot controller. and have found the mach3 post unsuitable as it gives a G40.1 code that shows an error in the new controller. I have contacted Mecsoft for a solution and was told that the latest 2015 visualmill had a post . Last year I upgraded to 2014 just before the latest version and I am not happy to have to shell out even more money.
Can the post processer in VM 2014 be altered to fix the problem, if so how, or can the G40.1 command be substituted with a G40 before running code. I am unclear what the G40.1 command is.
I would appreciate any further help on this matter as it will be of interest to other Tormach customers who have VM.
Can the post processer in VM 2014 be altered to fix the problem, if so how, or can the G40.1 command be substituted with a G40 before running code. I am unclear what the G40.1 command is.
I would appreciate any further help on this matter as it will be of interest to other Tormach customers who have VM.