MecSoft Corporation

Hi guys,
I need quick help dealing with small sized balustrade model. The problem is that computing the parallel finishing is very slow with relatively rough model /not too much faces/. The bounding box size is 17-5-1,5 mm. I am using 0,6 mm flat tool because it gives me satisfying result. The material is plastic. When I scale everything 100 times/including the tool/ the speed is OK. Do I miss some tuning? Playing with Part Sampling Resolution gave no result.
Thanks in advance!

The flat end mill you defined shows a shank diameter of 12mm. Changing this to the diameter of the tool (0.6mm) and regenerating the toolpath should generate the toolpath quickly.
Hope this helps!

Thank you for your on time help, really appreciate it !