RhinoTurn - Leave stock on X but not Z axis
-
- Posts: 31
- Joined: Mon May 19, 2014 1:05 pm
RhinoTurn - Leave stock on X but not Z axis
We are working mostly with solid models supplied from our customer that are drawn to finish size. Many times we will have to leave stock on a diameter (X) for grind, but not the shoulder (Z) or vice versa. We are used to having an option for X stock and an option for Z stock ( We have used Mazatrol, Mastercam etc.. ). Is there an easy way to do this without having to create extra geometry? The "Stock" feature leaves the stock on both X & Z and we would like to be able to choose each axis separately.
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: RhinoTurn - Leave stock on X but not Z axis
Currently you have to create additional geometry to do this. We will add an enhancement to the system