Is there a way to change all of the feeds/speeds at once or at least for each tool. I have a part that I am running in AL that I need to change over to run in SS. What is the best way to aproach this? I can't believe that I will have to change every Feeds/Speeds in each operation. This part has about 75 operations. What am I missing?
GreggT
Feeds / Speeds - Material Change
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Feeds / Speeds - Material Change
Gregg,
There is no mechanism in VM 5.0 that will allow you to do a global edit on a set of operations. However, this is a good idea. The user should be able to select a set of operations and right click to get a properties dialog. Anything that can be changed globally should be allowed. Similar to the properties dialog to change file properties in windows explorer. Allowable edits could be
1) Delete
2) Change tool
3) Change Feeds/Speeds
4) Change Clearance Plane
5) Change Regions
We can add this to our enhancement list.
There is no mechanism in VM 5.0 that will allow you to do a global edit on a set of operations. However, this is a good idea. The user should be able to select a set of operations and right click to get a properties dialog. Anything that can be changed globally should be allowed. Similar to the properties dialog to change file properties in windows explorer. Allowable edits could be
1) Delete
2) Change tool
3) Change Feeds/Speeds
4) Change Clearance Plane
5) Change Regions
We can add this to our enhancement list.
Feeds / Speeds - Material Change
Make it so.
GreggT
GreggT
Feeds / Speeds - Material Change
If you Mecsoft support guys keep having premonitions of our future support questions and enhancement requests; we are not going to need this board anymore!
Keep up the good work!
Keep up the good work!
Feeds / Speeds - Material Change
I wish they could premonisce me a contour remachine....
Greg
Greg