I am working in rhinocam 2020 and want to make flutes 36 inches high with a vbit. I want to have the flutes 0.6125 appart on the panel that is 48 inches wide. I tried 2 axis engraving which works but it cuts one flute starting at x zero and cuts to 36 inches on the y axis then returns to the next flute at the x zero and cuts it to 36 on the y axis. How do I get it to cut from x zero to y 36 then move over and cut from y36 back to x zero, etc.
Any help would be greatly appreciated.
Thanks,
Mike