Hi All,
I started using RhinoCAM recently, does it support a 4-axis milling machine with Z-axis as rotary axis, if yes how should I set it up.
Thanks!
obock-cam
Mill Rotation Axis as Z-axis
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: Mill Rotation Axis as Z-axis
As the tool remains normal to axis of rotation, rotary axis for 4 axis milling can only be defined about X or Y axis.
Rotary axis can be defined about Z axis for 5 axis setups.
Rotary axis can be defined about Z axis for 5 axis setups.