Good afternoon,
I am trying to nest a handful of parts onto a sheet of MDF. As far as I know I have everything checked and crossed, but whenever i try to perform the nest I just get an "Algorithmic Failure" message. Is there something I'm missing?
I'll attach the file so that you can have a look at it.
Thanks,
Jesse
Nesting not possible due to "Algorithmic Failure"
-
- Posts: 20
- Joined: Mon May 19, 2014 1:05 pm
Nesting not possible due to "Algorithmic Failure"
- Attachments
-
- St Thomas Church Countertops.3dm
- (259.19 KiB) Downloaded 741 times
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: Nesting not possible due to "Algorithmic Failure"
We are able to nest all parts to the sheet you defined. Please see attached.
- Attachments
-
- St Thomas Church Countertops-REV1.3dm
- (849.91 KiB) Downloaded 691 times
-
- Posts: 20
- Joined: Mon May 19, 2014 1:05 pm
Re: Nesting not possible due to "Algorithmic Failure"
Thanks but now I'm confused. I opened your file and without modifying anything I tried nesting and it notified me of the same algorithmic failure. Do I need to reinstall the software? I am assuming it must be something to do with my computer.
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: Nesting not possible due to "Algorithmic Failure"
We have verified this on 2 different machines running RhinoCAM 2019 for Rhino 6.0 and unable to duplicate the error. Please make sure you have the latest update of RhinoCAM 2019 installed. Select RhinoCAM from the menu and Check for Updates. If the problem still persist, please give us call.