help
trying to project lines in z to a surface
with no luck in cad cam
(lines and surface from NX)
megclay
lines to surface project in z
lines to surface project in z
- Attachments
-
- lines surface project in z.zip
- (17.84 KiB) Downloaded 947 times
-
- lines surface project in z.jpeg (40.67 KiB) Viewed 11349 times
Re: lines to surface project in z
is there anyway to project curves not along face normal's
-
- Posts: 2
- Joined: Fri Apr 08, 2016 10:33 am
Re: lines to surface project in z
extrude curves along z then use surface as a cutting tool then extract the curves you need from the extruded curves.
Re: lines to surface project in z
thanks a lot
got the first part
haw do I use a surface as a cutting tool
megclay
i will keep looking
got the first part
haw do I use a surface as a cutting tool
megclay
i will keep looking
- Attachments
-
- curves.jpeg (35.87 KiB) Viewed 11258 times
Re: lines to surface project in z
help
can someone try this
program with 1/2 aluminum
1/4 ball end mill .025 a pass
can't get the 3 Axis Projection Pocketing
to work with levels set to .025 for each pass
cutter just plunges down to the top of the surfaces
than starts to work correctly (ignores the stock above)
also
I gave up on trying to project the curves up in z
can someone try this
program with 1/2 aluminum
1/4 ball end mill .025 a pass
can't get the 3 Axis Projection Pocketing
to work with levels set to .025 for each pass
cutter just plunges down to the top of the surfaces
than starts to work correctly (ignores the stock above)
also
I gave up on trying to project the curves up in z
- Attachments
-
- .50_stock_cut_.025_pass.jpeg (37.45 KiB) Viewed 11249 times