Webinar: Using Robots for Milling

All discussion related to the VisualCAD/CAM standalone product.
Post Reply
MecSoft Marketing
Posts: 397
Joined: Wed Oct 07, 2009 11:10 am
Location: Irvine, CA - 92614
Contact:

Webinar: Using Robots for Milling

Post by MecSoft Marketing »

On Wednesday, April 1st, 2020 we hosted an open webinar featuring ‘Using Robots for Milling’. We thank everyone that joined us.

We covered:

- Setup and preparation of a part for CAM programming using MecSoft CAM products
- Programming 3 to 5 axis toolpaths and post processing G-code
- Defining Robots and work cells using RoboDK
- Transferring CAD model & posted code from MecSoft CAM to RoboDK
- Verifying motions and sending code from RoboDK to the Robot controller

If you missed it, catch the replay at https://youtu.be/FMG-CkB4CL4

Please let us know if you have any questions.

Thank you.
Post Reply