VisualMILL 6.0 Released!

by **Administrator** » Wed Oct 24, 2007 9:50 am

VisualMILL 6.0 was released on 10/23/07. To get more information on the release please follow this link:

http://www.mecsoft.com/vm6/visualmill6.html

This is a first release of the VisualMILL 6.0 series of products. The product that has been released is an upgrade from the VisualMill 5.0 Basic product.

Here is our schedule for our upcoming releases:

VisualMILL 6.0 4th Axis: Nov 19th, 2007
VisualMILL 6.0 PRO: Dec 17th, 2007

Please drop us an email to sales@mecsoft.com for upgrade information and support@mecsoft.com for technical information.

by **Jon Banquer** » Wed Oct 24, 2007 12:18 pm

Will Visual Mill 6.0 4th axis have MachineWorks or just Visual Mill 6.0 Pro?

Is it too early to start requesting enhancements for Visual CAM 1.0 / Visual Mill 6.0?

Jon Banquer
San Diego, CA

by **MecSoft Support** » Wed Oct 24, 2007 12:58 pm

Hi Jon,

VisualMILL 4th axis will have Machineworks (VisualMill 5.0 4th axis module already does)

Regarding enhancements we will open a new forum for VisualMILL 6.0 in the next few days. So please wait until then.

by **Jon Banquer** » Wed Oct 24, 2007 2:33 pm

"VisualMILL 4th axis will have Machineworks"

Great.

"Regarding enhancements we will open a new forum for VisualMILL 6.0 in the next few days. So please wait until then."

No problem. Look forward it.

Jon Banquer
San Diego, CA

by **ryan** » Thu Oct 25, 2007 6:53 am

of course i have to ask, looking at rhinoCAM at the beginning of the year or sooner?

by **MecSoft Support** » Thu Oct 25, 2007 9:45 am

We are looking at the end of the year 2007 for RhinoCAM 2.0

by **DareBee** » Thu Nov 01, 2007 5:06 am

I do not see 4th axis pocketing listed in the feature specs for VM6.
I hope this hasn't been overlooked again.

by **MecSoft Support** » Thu Nov 01, 2007 12:20 pm

The 4th axis module will be released on Nov 19th. This module will include a few new 4th axis methods including a pocketing type of machining.

by **DareBee** » Thu Nov 01, 2007 2:06 pm

Woohoo - THATS WHAT I AM TALKIN' ABOUT

You should add that to the VM6 spec sheet, no sense losing potential sales for the lack of a few words.

by **MecSoft Support** » Thu Nov 01, 2007 2:31 pm

Hi DareBee,
Marketing insists that we do not add features that have not yet been released in the spec sheet. So we have added only those features we have already released in VM 5.0 for the 4th axis and the Pro products.

by **DareBee** » Fri Nov 02, 2007 4:22 am

Safety net - eh

by **smallshop** » Sat Nov 03, 2007 8:17 am

When RhinoCam 2.0 is released will it run on Rhino 4.0 or 3.0? I have both Rhinos on my computers but have only run my cam software on 3.0 (...if it works don't fix it.)

Did you do the bulk of your development for RhinoCam on 3.0 or 4.0? I would like to be able to run RhinoCam Pro 2.0 inside Rhino 4.0 if possible.

by **Mitch Heynick** » Sat Nov 03, 2007 12:32 pm

I would expect (and hope) it to run ONLY on Rhino 4, there's no reason at all to waste time developing something for Rhino V3 now, nor any reason to be limited by an older SDK... --Mitch

by **MecSoft Support** » Mon Nov 05, 2007 9:40 am

Mitch is right. We will be releasing new versions only on Rhino 4.0. RhinoCAM 1.0 for Rhino 3.0 is not under active development and will be updated only under extreme duress!

by **Rainer** » Tue May 20, 2008 8:34 am

MecSoft Support wrote:We are looking at the end of the year 2007 for RhinoCAM 2.0

Is there any news you can share?

Cheers
Rainer

VisualMILL 6.0 Released!

VisualMILL 6.0 Released!

Who is online