Training manual 2014
-
- Posts: 24
- Joined: Tue Jul 26, 2011 2:21 pm
Training manual 2014
Hi. I have been using visualmill 6 standard for a few years now I found the training manual very useful to start with. I am considering upgrading to 2014 standard. Have you produced a manual for this latest software.
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: Training manual 2014
Yes, we have an updated 2014 Training Manual that ships with the product.
-
- Posts: 24
- Joined: Tue Jul 26, 2011 2:21 pm
Re: Training manual 2014
Many thanks Mecsoft. I contacted the UK supplier ( Simply Rhino) regarding upgrading to 2014. I asked about training manual. They said it would have to be obtained direct from you. Is this the case?
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: Training manual 2014
With 2014 version, Getting Started Guide (GSG) has been replaced with Quick Start Guide that ships with the product. The GSG of the 2012 product version should be applicable to the 2014 version since the UI had not changed much.