RhinoCAM
RhinoCAM is a CAM Software plug-in that runs completely inside of Rhinoceros 7/8 (Windows only).
RhinoCAM marries the power of Rhino’s freeform modeling with the legendary CAM functionality of VisualCAM to bring you a product of unrivaled capability.
With seamless and complete integration RhinoCAM, acts and feels like you are working with Rhino when generating CNC programs. RhinoCAM is also fully associative to any geometry changes within Rhino.
RhinoCAM includes modules for MILL, TURN, NEST, MESH & ART
Configurations
RhinoCAM CAM software comes in 5 different configurations to suit the varied machining needs of our customers.
RhinoCAM Xpress (XPR)
RhinoCAM Standard (STD)
RhinoCAM Expert (EXP)
RhinoCAM Professional (PRO)
RhinoCAM Premium (PRE)
RhinoCAM Features
RhinoCAM comes in 5 different configurations to suit the various needs of our customers. These are Express (XPR), Standard (STD), Expert (EXP), Professional (PRO) & Premium (PRE). The features found in each of these configurations are tabulated below.
https://www.high-endrolex.com/22
2 1/2-AXIS MILLING | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
Pocketing | |||||
Profiling | |||||
Facing | |||||
Engraving | |||||
V-Carving | |||||
V-Carve Roughing | |||||
2-1/2 Axis Feature Detection | |||||
2-1/2 Axis Feature Machining | |||||
2-1/2 Axis Roughing | |||||
High Speed Pocketing | |||||
Chamfering | |||||
Hole Profiling | |||||
Hole Pocketing | |||||
T-Slot Milling | |||||
Slot Milling | |||||
Thread Milling | |||||
Drag Knife Cutting | |||||
Re-Machining | |||||
Saw Machining |
3 AXIS MILLING | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
Horizontal Roughing | |||||
Parallel Finishing | |||||
3 Axis Feature Detection | |||||
3 Axis Feature Machining | |||||
Horizontal Finishing | |||||
Radial Machining | |||||
Spiral Machining | |||||
Clear Flats Machining | |||||
Plunge Roughing | |||||
Horizontal Re-roughing | |||||
Plunge Re-roughing | |||||
Projection Pocketing | |||||
3D Offset Profiling | |||||
3D Offset Pocketing | |||||
Pencil Tracing | |||||
Valley Re-Machining | |||||
Plateau Machining | |||||
Steep Area Parallel Machining | |||||
Horizontal Hill Machining | |||||
Curve Machining | |||||
Between 2 Curves Machining | |||||
Reverse Post Machining |
4 AXIS MILLING | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
4 Axis Indexed Machining | |||||
4 Axis Auto Multiple Indexing | |||||
4 Axis Continuous Facing | |||||
4 Axis Continuous Pocketing | |||||
4 Axis Continuous Profiling | |||||
4 Axis Continuous Engraving | |||||
4 Axis Parallel Roughing | |||||
4 Axis Parallel Finishing | |||||
4 Axis Radial Finishing | |||||
4 Axis Projection Pocketing | |||||
4 Axis Drive Surface Machining (True 4 Axis) |
5 AXIS MILLING | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
5 Axis Indexed Machining | |||||
5 Axis Curve Projection Machining | |||||
5 Axis Continuous Flow Curve Machining | |||||
5 Axis Between 2 Curves Machining | |||||
5 Axis Drive Curve Machining | |||||
5 Axis Surface Normal Machining | |||||
5 Axis Swarf Machining |
4 AXIS MILLING | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
4 Axis Indexed Machining | |||||
4 Axis Auto Multiple Indexing | |||||
4 Axis Continuous Facing | |||||
4 Axis Continuous Pocketing | |||||
4 Axis Continuous Profiling | |||||
4 Axis Continuous Engraving | |||||
4 Axis Parallel Roughing | |||||
4 Axis Parallel Finishing | |||||
4 Axis Radial Finishing | |||||
4 Axis Projection Pocketing | |||||
4 Axis Drive Surface Machining (True 4 Axis) |
HOLE MAKING | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
Automatic Hole Selection, Sorting | |||||
Drilling | |||||
Tapping | |||||
Boring | |||||
Reverse Boring | |||||
User Defined Cycles | |||||
4 Axis Drilling | |||||
4 Axis Tapping | |||||
4 Axis Boring | |||||
4 Axis Reverse Boring |
TOOLS | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
Standard Tools (Ball, Flat, C Rad., Vee, Drill) | |||||
Advanced Tools (Taper,Tap,Bore,R.Bore) | |||||
Form Tools | |||||
Stepped Tools | |||||
Analytical Holder Collision Detection |
TOOLPATH EDITING | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
Toolpath Graphical Viewing | |||||
Toolpath Graphical Editing | |||||
Toolpath Instancing | |||||
Toolpath Arc Fitting |
POWER FEATURES | XPR | STD | EXP | PRO | PRE |
---|---|---|---|---|---|
Avoid Regions | |||||
Predefined Regions | |||||
Default Knowledge Base | |||||
Machine Control Operation | |||||
Cabinet Design Decomposition | |||||
Rotate Table Setups | |||||
Multiple Setups | |||||
Fixture Offset Programming | |||||
Check Surface Boundary Creation | |||||
Tool Silhouette Boundary Creation | |||||
Tool Double Contact Boundary Creation | |||||
Tool Holder Collision Boundary Creation |
2 AXIS TURNING | XPR | SDT | EXP | PRO | PRE |
---|---|---|---|---|---|
Roughing | |||||
Finishing | |||||
Groove Roughing | |||||
Groove Finishing | |||||
Threading | |||||
Follow Curve Finishing | |||||
Parting Off | |||||
Groove Finishing |
AXIAL HOLE MAKING | XPR | SDT | EXP | PRO | PRE |
---|---|---|---|---|---|
Drilling | |||||
Tapping | |||||
Boring | |||||
Reverse Boring |
CUTTING SIMULATION | XPR | SDT | EXP | PRO | PRE |
---|---|---|---|---|---|
Toolpath Animation | |||||
Cut Material Simulation | |||||
Advanced Cut Material Simulation | |||||
Visual Holder Collision Detection | |||||
Part-Stock Comparison | |||||
Machine Tool Simulation (MILL Only) |
POST PROCESSOR GENERATOR | XPR | SDT | EXP | PRO | PRE |
---|---|---|---|---|---|
Customizable Post Generator | |||||
Simulate Cycles | |||||
Arc Output | |||||
Helix Output | |||||
Spiral Output | |||||
5 Axis Output |
MISCELLANEOUS | XPR | SDT | EXP | PRO | PRE |
---|---|---|---|---|---|
HTML Shop Documentation |
ART MODULE | XPR | SDT | EXP | PRO | PRE |
---|---|---|---|---|---|
Create 3D Relief from bitmap image files | |||||
Ability to limit creation of reliefs using colors and/or curves | |||||
Create puffed up 3D volumes using closed curves | |||||
Create 3D sweep volumes using various profiles | |||||
Combine 3D volumes using various Boolean operations | |||||
Export created 3D volumes as Mesh geometry to CAD system | |||||
Convert 3D CAD geometry to ART 3D volumes | |||||
Convert Raster to Vector to create 2D curves | |||||
Save & reuse previously created 3D volumes using Shape Library |
NEST MODULE | XPR | SDT | EXP | PRO | PRE |
---|---|---|---|---|---|
Rectangular (sometimes referred to as ‘block’ nesting) | |||||
True Shape Nesting | |||||
2D & 3D Parts Nesting | |||||
2D & 3D Parts Nesting | |||||
Specify Distance limits between part and sheet | |||||
Control Accuracy of Nest | |||||
Set Nest Direction | |||||
Set Grain Direction | |||||
Unlimited number of Sheets | |||||
Nested sheet output by Layers or Color | |||||
Specify Distances between Parts | |||||
Specify Rotation limits of Parts | |||||
Allow mirroring of Parts | |||||
Allow Part-in-Part Nesting | |||||
Estimate # of Sheets needed for Nest | |||||
Allow Overflow Utilization | |||||
Tag Nests for part IDs |
XPR | SDT | EXP | PRO | PRE | |
---|---|---|---|---|---|
Runs inside Rhino 7.0 & 8.0 |